Zanussi ZHC 935 Instruction Booklet - Page 13

Browse online or download pdf Instruction Booklet for Ventilation Hood Zanussi ZHC 935. Zanussi ZHC 935 20 pages. Cooker hood
Also for Zanussi ZHC 935: Instruction Booklet (19 pages), Instruction Booklet (20 pages)

Print Page

Fitting the Wall Brackets

Draw a vertical line on the wall from the centre of

the cooking appliance up to the ceiling, or as high

as the adjoing wall cabinets using a spirit level

and marker pen. This is to ensure the correct

vertical alignment of the appliance.

Draw a horizontal line 965mm above the

hob

Place bracket item 7.2.1 on the wall as

shown about 1-2mm from the ceiling or

upper limit aligning-notch in the centre of

the bracket with the vertical line.

Mark the hole centres for the bracket

fixing screws on the wall.

Place bracket item 7.2.1 on the wall as

shown at 215mm below the first bracket

at X.

Mark the hole centres for the bracket

fixing screws on the wall.

INSTALLING THE COOKER HOOD

7.2.1

116

Mark a hole centre on the horizontal line

965mm above the worktop, 116mm either

side of the vertical line as indicated.

Drill the holes marked on the wall using a

Ø8mm drill-bit.

Fix the two brackets item 7.2.1.