Zanussi ZHC 935 Buklet Instruksi - Halaman 13

Jelajahi secara online atau unduh pdf Buklet Instruksi untuk Kap Ventilasi Zanussi ZHC 935. Zanussi ZHC 935 20 halaman. Cooker hood
Juga untuk Zanussi ZHC 935: Buklet Instruksi (19 halaman), Buklet Instruksi (20 halaman)

Halaman Cetak

Fitting the Wall Brackets

Draw a vertical line on the wall from the centre of

the cooking appliance up to the ceiling, or as high

as the adjoing wall cabinets using a spirit level

and marker pen. This is to ensure the correct

vertical alignment of the appliance.

Draw a horizontal line 965mm above the

hob

Place bracket item 7.2.1 on the wall as

shown about 1-2mm from the ceiling or

upper limit aligning-notch in the centre of

the bracket with the vertical line.

Mark the hole centres for the bracket

fixing screws on the wall.

Place bracket item 7.2.1 on the wall as

shown at 215mm below the first bracket

at X.

Mark the hole centres for the bracket

fixing screws on the wall.

INSTALLING THE COOKER HOOD

7.2.1

116

Mark a hole centre on the horizontal line

965mm above the worktop, 116mm either

side of the vertical line as indicated.

Drill the holes marked on the wall using a

Ø8mm drill-bit.

Fix the two brackets item 7.2.1.