Zanussi ZHC 935 지침 책자 - 페이지 13

{카테고리_이름} Zanussi ZHC 935에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Zanussi ZHC 935 20 페이지. Cooker hood
Zanussi ZHC 935에 대해서도 마찬가지입니다: 지침 책자 (19 페이지), 지침 책자 (20 페이지)

페이지 인쇄

Fitting the Wall Brackets

Draw a vertical line on the wall from the centre of

the cooking appliance up to the ceiling, or as high

as the adjoing wall cabinets using a spirit level

and marker pen. This is to ensure the correct

vertical alignment of the appliance.

Draw a horizontal line 965mm above the

hob

Place bracket item 7.2.1 on the wall as

shown about 1-2mm from the ceiling or

upper limit aligning-notch in the centre of

the bracket with the vertical line.

Mark the hole centres for the bracket

fixing screws on the wall.

Place bracket item 7.2.1 on the wall as

shown at 215mm below the first bracket

at X.

Mark the hole centres for the bracket

fixing screws on the wall.

INSTALLING THE COOKER HOOD

7.2.1

116

Mark a hole centre on the horizontal line

965mm above the worktop, 116mm either

side of the vertical line as indicated.

Drill the holes marked on the wall using a

Ø8mm drill-bit.

Fix the two brackets item 7.2.1.