Blackberry Radar H2 Installation Manual - Page 14

Browse online or download pdf Installation Manual for Radar Blackberry Radar H2. Blackberry Radar H2 30 pages. Dry van, insulated trailers roll-up doors
Also for Blackberry Radar H2: Installation Manual (33 pages), Installation Manual (26 pages), Installation Manual (25 pages), Installation Manual (32 pages), Installation Manual (33 pages), Installation Manual (34 pages), Installation Manual (35 pages), Instruction Manual (33 pages), Installation Manual (32 pages), Installation Manual (26 pages), Installation Manual (25 pages), Installation Manual (28 pages)

Print Page

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE

3.3 Matching a module identifier to an asset identifier

In order to track an asset, the Radar H2 module that is installed on the asset must be

associated with the asset in the BlackBerry Radar Dashboard. It is, therefore, very

important to keep a clear record of which Radar H2 module is installed on which asset.

The Dashboard application tracks modules and assets using 'identifiers'. The asset

identifier is the name or number of the asset you wish to track. The asset identifiers are

entered into the application when you add the assets, and will be listed on your installation

worksheet. The identifier for each Radar H2 module is printed on two labels—one attached

to the rear housing and the other in the battery compartment. The module identifier also

serves as the serial number (S/N) for the module.

To match a module identifier with an asset identifier:

1. Locate the module identifier for your device. The module identifier is shown in two

places.

1. Externally—temporary S/N label, attached to the front of the outer housing,

2. Internally—permanent main product label, in the battery compartment.