Blackberry Radar H2 Installation Manual - Page 20

Browse online or download pdf Installation Manual for Radar Blackberry Radar H2. Blackberry Radar H2 30 pages. Dry van, insulated trailers roll-up doors
Also for Blackberry Radar H2: Installation Manual (33 pages), Installation Manual (26 pages), Installation Manual (25 pages), Installation Manual (32 pages), Installation Manual (33 pages), Installation Manual (34 pages), Installation Manual (35 pages), Instruction Manual (33 pages), Installation Manual (32 pages), Installation Manual (26 pages), Installation Manual (25 pages), Installation Manual (28 pages)

Print Page

BLACKBERRY RADAR H2 ITC100-1 INSTALLATION GUIDE

1. As indicated in Section 3.3 of this guide, record the module identifier and the asset

identifier the module will be paired with. For your convenience, you may quickly

create a record of the module and asset identifier pairings by removing the partially

attached label from the rear housing of the module and placing it on the installation

worksheet, next to the asset that will be tracked by this module.

Tip: For modules that have been previously transferred to new assets, the

temporary S/N label may no longer be in place. If this is the case, you will

need to write the module identifier (S/N) for each module on the installation

worksheet.

2. After selecting the best installation location for your van, remove the adhesive from

the rear of the template and place the template in the desired installation location.

The adhesive at the back of the template ensures that it stays on the door surface for

accurate drilling of your holes.