Directed Xpresskit DBALL2 Installation Manual - Page 14

Browse online or download pdf Installation Manual for Door locks Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 16 pages. Ford5 remote start ready (rsr) installation
Also for Directed Xpresskit DBALL2: Installation Manual (12 pages), Installation Manual (19 pages), Installation Manual (18 pages), Manual (14 pages), Installation Manual (13 pages), Installation Manual (14 pages), Installation Manual (19 pages), Installation Manual (16 pages), Installation Manual (20 pages), Installation Manual (15 pages), Installation And Quick Reference Manual (16 pages), Installation Manual (18 pages), Installation Manual (18 pages), Installation Manual (16 pages), Manual (19 pages)

Print Page

Directed Xpresskit DBALL2 Installation Manual

Quick Reference Guide

DBALL2-CHYRSLER8 Remote Start Ready (RSR) Installation

Vehicle Takeover

Press the remote start button on the transmitter to

start the vehicle.*

Press the Unlock button on the factory

or aftermarket remote.*

Enter the vehicle.

Insert the key into the ignition barrel and

turn the key to the ON position.

Press the brake pedal, put the car

in gear and drive off.

* Your aftermarket remote may differ from the model shown in the illustrations.

Press

remote start

button*

Press Unlock

button on

either remote*

Enter vehicle

Key IN

START

Ready to

drive off

Pit Stop Mode

The Pit Stop Mode feature is practical when you need to stop and run an errand,

but wish to keep the engine running.

Stop the vehicle in a safe parking spot

and put the gear in Park (P).

Press the button to remote start the vehicle.*

Remove the key from ignition.

It is now safe to leave the engine running and exit the

vehicle with the factory remote in hand.

Note: We recommend that you always lock the doors

of your vehicle when leaving it unattended.

* Your aftermarket remote may differ from the model shown in the illustrations.

Parking Light Error Codes

The parking lights on your vehicle will flash a specific number of times 3 seconds

following an unscheduled shutdown or failure to start. Each flashing pattern is

described below.

Flashes

Diagnostic

Runtime expired.

Over-rev shutdown.

Low/No RPM.

Transmitter shutdown.

Brake shutdown.

Hood shutdown/Remote start safety override switch is ON*.

Remote start safety override switch is ON*.

* If the vehicle hood status is supported through data, safety override switch input

will report 7 flashes.

Stop & put vehicle in Park (P)

Press

remote start

button*