Clarke 6500490 Operation & Maintenance Instructions Manual - Page 5
Browse online or download pdf Operation & Maintenance Instructions Manual for Sander Clarke 6500490. Clarke 6500490 13 pages. Buffer/polisher
Print Page
2. DO NOT switch the buffer/polisher on whilst the wheel is in contact with the
workpiece.
3. Avoid polishing dissimilar metals with the same buffing wheel; galvanic
corrosion may occur.
4. DO NOT touch the workpiece immediately after polishing as it may be very
hot.
5. DO NOT touch the buffing wheel whilst operating or whilst plugged into the
mains power.
6. DO NOT leave the buffer/polisher running unattended.
7. DO NOT operate the buffer/polisher when you are tired or under the
influence of alcohol, drugs or intoxicating medication.
8. When not in use, switch the buffer/polisher off and remove the plug from the
power supply.
SAFETY SYMBOLS
The above symbols may appear on the machine.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Read the manual
and safety
instructions before
use
Ear protection
should be worn
HAZARD, Motor
gets hot
5
Eye protection
should be worn
Dust mask should be
worn