Clarke 6500490 Instrukcja obsługi i konserwacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke 6500490. Clarke 6500490 13 stron. Buffer/polisher

2. DO NOT switch the buffer/polisher on whilst the wheel is in contact with the

workpiece.

3. Avoid polishing dissimilar metals with the same buffing wheel; galvanic

corrosion may occur.

4. DO NOT touch the workpiece immediately after polishing as it may be very

hot.

5. DO NOT touch the buffing wheel whilst operating or whilst plugged into the

mains power.

6. DO NOT leave the buffer/polisher running unattended.

7. DO NOT operate the buffer/polisher when you are tired or under the

influence of alcohol, drugs or intoxicating medication.

8. When not in use, switch the buffer/polisher off and remove the plug from the

power supply.

SAFETY SYMBOLS

The above symbols may appear on the machine.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Read the manual

and safety

instructions before

use

Ear protection

should be worn

HAZARD, Motor

gets hot

Eye protection

should be worn

Dust mask should be

worn