Clarke Contractor CBS2 Operating & Maintenance Instructions - Page 7
Browse online or download pdf Operating & Maintenance Instructions for Sander Clarke Contractor CBS2. Clarke Contractor CBS2 17 pages.
Also for Clarke Contractor CBS2: Operation & Maintenance Instructions Manual (17 pages)
Print Page
PREPARATION
Changing The Sanding Belt
Disconnect the plug from the power source before changing the belt.
To change the sanding belt, proceed as follows:
1
Pull out the belt tension lever.
2
Slide the old belt away from the rollers.
3
Slide the new sanding belt into position over the front and rear rollers, ensuring that
the arrows on the sanding belt and on the tool are pointing in the same direction.
4
Push the sanding belt tension lever back into the recess to apply the tension.
WARNING !
7