Clarke Contractor CBS2 Gebruiks- en onderhoudsinstructies - Pagina 7
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Clarke Contractor CBS2. Clarke Contractor CBS2 17 pagina's.
Ook voor Clarke Contractor CBS2: Handleiding voor bediening en onderhoud (17 pagina's)
Pagina afdrukken
PREPARATION
Changing The Sanding Belt
Disconnect the plug from the power source before changing the belt.
To change the sanding belt, proceed as follows:
1
Pull out the belt tension lever.
2
Slide the old belt away from the rollers.
3
Slide the new sanding belt into position over the front and rear rollers, ensuring that
the arrows on the sanding belt and on the tool are pointing in the same direction.
4
Push the sanding belt tension lever back into the recess to apply the tension.
WARNING !
7