Directed Electronics 3100 Installation Manual - Page 7

Browse online or download pdf Installation Manual for Car Alarm Directed Electronics 3100. Directed Electronics 3100 16 pages. Car security

Print Page

Internal Programming Jumper

Important: The module must be unscrewed to access the light flash jumper.

This jumper is used to determine the light flash output. In the (+) position, the

on-board relay is enabled and the unit will output (+)12V on the H1/2 WHITE

wire. In the (-) position, the on-board relay is disabled. The H1/2 WHITE wire

will supply a (-) 200 mA output suitable for driving factory parking light relays.

To access the jumper, open the control module.

Important:

For parking light circuits that draw 10 amps or more, the internal

P/N 8617

jumper must be switched to a (-) light flash output.

or a standard au-

tomotive SPDT relay must be used on the H1/2 light flash output harness wire.