Directed Electronics 3100 Manual de instalação - Página 7

Procurar online ou descarregar pdf Manual de instalação para Alarme para automóvel Directed Electronics 3100. Directed Electronics 3100 16 páginas. Car security

Imprimir página

Directed Electronics 3100 Manual de instalação

Internal Programming Jumper

Important: The module must be unscrewed to access the light flash jumper.

Light Flash

This jumper is used to determine the light flash output. In the (+) position, the

on-board relay is enabled and the unit will output (+)12V on the H1/2 WHITE

wire. In the (-) position, the on-board relay is disabled. The H1/2 WHITE wire

will supply a (-) 200 mA output suitable for driving factory parking light relays.

To access the jumper, open the control module.

Important:

For parking light circuits that draw 10 amps or more, the internal

P/N 8617

jumper must be switched to a (-) light flash output.

or a standard au-

tomotive SPDT relay must be used on the H1/2 light flash output harness wire.