Directed Electronics 3000 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Remote Starter Directed Electronics 3000. Directed Electronics 3000 16 pages. Remote start system with keyless entry
Also for Directed Electronics 3000: Quick Reference Install Manual (2 pages)

Print Page

•

The brake pedal is pressed.

•

The hood is opened.

•

The shutdown toggle switch is put into the OFF position

•

The pre-programmed run time has elapsed.

•

The procedure to activate remote start is repeated.

Valet Take-Over

The Valet Take-Over feature allows the vehicle to remain running after

the key has been removed from the ignition. This feature is useful if you

want to exit and lock the vehicle for short periods of time, but would like

to leave the motor running and the climate controls on.

To perform Valet Take-Over:

Before turning off the engine, send Remote Start command from

your SmartStart application.

Turn the ignition key to the OFF position (The engine will stay

running).

The engine will run until the pre-programmed time elapses or a

shut-down input is received. (See the previous section for a com-

plete list of shut-down inputs.)

Note: This feature will not work if the brake pedal is being pressed.

Starter Anti-Grind Circuitry

Whenever the vehicle is remote started, advanced anti-grind circuitry

prevents the starter from engaging, even if the key is turned to the start

position. This prevents damage to the starter motor if the key is turned to

the start position during remote start operation.

Note: Anti-grind circuitry only works when the remote start system is

op er at ing the motor and the optional relay is installed.