Clarke 6470162 Operation & Maintenance Instructions Manual - Page 10

Browse online or download pdf Operation & Maintenance Instructions Manual for Saw Clarke 6470162. Clarke 6470162 17 pages. 355mm abrasive cut-off saw

Print Page

CHANGING THE SPACING BETWEEN THE FENCE AND VICE

1. Use the wrench provided to loosen

and remove the two fence bolts.

2. Adjust the fence to the desired

position.

3. Tighten the fence bolts securely

before use.

REMOVAL AND INSTALLATION OF CUTTING DISCS

WARNING: TURN OFF AND UNPLUG THE TOOL BEFORE MAKING ANY

ADJUSTMENTS OR REMOVING OR INSTALLING CUTTING WHEELS. BE SURE

THE TRIGGER SWITCH IS IN THE OFF POSITION.

Cutting discs are available from your CLARKE dealer - Part Number: 6470800

1. With the motor arm in the 'UP'

position, rotate the blade guard

out of the way as shown.

• This will expose the inner guard

and its securing screw.

2. Loosen the inner guard securing

screw and swing both the inner

and main guards as far as possible

to expose the cutting disc retaining

nut.

3. Hold the cutting disc and use a

wrench to loosen and remove the

bolt in the center of the disc.

4. Remove the bolt, washer, outside

flange and old cutting disc.

• Make sure that the retaining disc

surfaces are clean and flat.

5. Install the new cutting disc by

reversing the above steps.

• Do not overtighten the bolt.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]