Clarke 6470162 Manual de Instruções de Operação e Manutenção - Página 10
Procurar online ou descarregar pdf Manual de Instruções de Operação e Manutenção para Serra Clarke 6470162. Clarke 6470162 17 páginas. 355mm abrasive cut-off saw
Imprimir página
CHANGING THE SPACING BETWEEN THE FENCE AND VICE
1. Use the wrench provided to loosen
and remove the two fence bolts.
2. Adjust the fence to the desired
position.
3. Tighten the fence bolts securely
before use.
REMOVAL AND INSTALLATION OF CUTTING DISCS
WARNING: TURN OFF AND UNPLUG THE TOOL BEFORE MAKING ANY
ADJUSTMENTS OR REMOVING OR INSTALLING CUTTING WHEELS. BE SURE
THE TRIGGER SWITCH IS IN THE OFF POSITION.
Cutting discs are available from your CLARKE dealer - Part Number: 6470800
1. With the motor arm in the 'UP'
position, rotate the blade guard
out of the way as shown.
• This will expose the inner guard
and its securing screw.
2. Loosen the inner guard securing
screw and swing both the inner
and main guards as far as possible
to expose the cutting disc retaining
nut.
3. Hold the cutting disc and use a
wrench to loosen and remove the
bolt in the center of the disc.
4. Remove the bolt, washer, outside
flange and old cutting disc.
• Make sure that the retaining disc
surfaces are clean and flat.
5. Install the new cutting disc by
reversing the above steps.
• Do not overtighten the bolt.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10