Clarke 3108005 Operation & Maintenance Instructions Manual - Page 9

Browse online or download pdf Operation & Maintenance Instructions Manual for Tools Clarke 3108005. Clarke 3108005 17 pages. 3pc air tool kit

Print Page

• Moving quickly over the surface will give a thin coat and slow

movement will give a heavy coat.

• Apply one coat at a time. If a further coat is required, make sure you

observe the manufacturers drying time recommendations before

applying a second coat.

• When spraying small areas, keep the output control on a low setting

as this will avoid using too much paint and prevent overspray.

10. Where possible, avoid stopping and starting when spraying. This can lead

to too much, or not enough paint being applied .

• The material deposited should always be even and wet. Lap each

stroke over the preceding stroke to obtain a uniform finish.

• To ensure the edges are covered, start spraying just to the side of the

area being sprayed and do not stop until the spray has gone past

the opposite edge.

• Damage to the needle or nozzle, or any of the air ports, will result in a

faulty spray pattern. Take care when cleaning or assembling these

components.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]