Afterglow FW-CTGSQFP Manual - Page 9

Browse online or download pdf Manual for Outdoor Fireplace Afterglow FW-CTGSQFP. Afterglow FW-CTGSQFP 17 pages. Cottage 34 in square gas fire pit

Afterglow FW-CTGSQFP Manual
7. Un-screw the Handle Assembly (O), attach the Handle to the Door (D) using the phillips screw driver, then
screw it tightly (see Figure 7).
NOTE: DO NOT tighten the screws completely.
8. Attach the assembled base to the Table Top Assembly (A) with Bolt (AA) and Washer (BB) using the Hex Screw
Driver (CC). Make sure the control panel just covers up the notch on the Right Panel (B), (see Figure8). Then
tighten all the screws completely.
NOTE: DO NOT tighten the screws completely.
Hardware Used:
AA Bolt (M6 x 15)
BB Washer (M6)
CC Hex screw driver
FOR YOUR SAFETY: Surfaces of fire pit can remain extremely hot for
a period after use. Allow 45 minutes to cool down before touching or
moving the fire pit.
9. Put the Lava Rock (P) around the burner, then remove the label from the pilot box (see Figure 9). A gas fire pit
requires 13.2 lbs lava rock. NOTE: DO NOT completely cover the burner element or block the pilot box
with the lava rocks. When the first use, preheat the lava rocks for 15 minutes to burn out the impurities
and air in the natural lava rocks.
WARNING: keep children away during assembly, as this item contains lava rock, which are small pieces and
can be swallowed by children.
x 4
x 4
x 1
P
pilot box
Figure 7
BB
AA
CC
Figure 8
Figure 9
09