Clarke CEA150 Operating & Maintenance Instructions - Page 5

Browse online or download pdf Operating & Maintenance Instructions for Tools Clarke CEA150. Clarke CEA150 13 pages. 150mm electric earth borer

Print Page

ELECTRICAL CONNECTIONS

WARNING! Read these electrical safety instructions thoroughly

before connecting the product to the mains supply.

Before switching the product on, make sure that the voltage of your electricity

supply is the same as that indicated on the rating plate. This product is

designed to operate on 230VAC 50Hz. Connecting it to any other power

source may cause damage.

This product may be fitted with a non-rewireable plug. If it is necessary to

change the fuse in the plug, the fuse cover must be refitted. If the fuse cover

becomes lost or damaged, the plug must not be used until a suitable

replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due

to damage, it should be cut off and a replacement fitted, following the wiring

instructions shown below. The old plug must be disposed of safely, as insertion

into a mains socket could cause an electrical hazard

WARNING! The wires in the power cable of this product are

coloured in accordance with the following code:

Blue = Neutral

If the colours of the wires in the power cable of this product do not correspond

with the markings on the terminals of your plug, proceed as follows.

• The wire which is coloured Blue must be connected to the terminal

which is marked N or coloured Black.

• The wire which is coloured Brown must be connected to the terminal

which is marked L or coloured Red.

Ensure that the outer sheath of the cable is firmly held by the clamp

We strongly recommend that this machine is connected to the mains supply via a Residual

Current Device (RCD) If in any doubt, consult a qualified electrician. DO NOT attempt any

repairs yourself. This is a class II product which does not require an earth connection.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Brown = Live

Plug must be BS1363/A approved.

Neutral

(Blue)

Always fit a 13 Amp fuse.

Live

(Brown)