Clarke CEA150 Operating & Maintenance Instructions - Page 7

Browse online or download pdf Operating & Maintenance Instructions for Tools Clarke CEA150. Clarke CEA150 13 pages. 150mm electric earth borer

Print Page

INSTALLING THE AUGER BIT

1. Slide the auger bit onto the drive

shaft, insert the securing pin and

secure with the split pin provided.

2. Plug the auger into a suitable

mains power outlet via a suitable

extension cable marked for

outdoor use.

• The extension cable must be

suitable to carry the current

needed. An undersized cable

will cause the voltage to drop and cause it to overheat.

OPERATION

BEFORE STARTING

1. Clear vegetation from around the location of the hole.

• This will prevent vegetation from binding around the auger bit.

2. Do not use the auger on rocky ground.

3. Examine the extension cable frequently for damage.

POSITIONING YOURSELF DURING USE

1. Use a wide, stable stance.

2. Keep your feet away from the auger.

3. Hold the handles tightly.

4. Make sure that you keep the extension cable away from the auger bit.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]