Clarke-tech VBOX V4000 User Manual - Page 12

Browse online or download pdf User Manual for Antenna Clarke-tech VBOX V4000. Clarke-tech VBOX V4000 12 pages. 2-in-1, full-function antenna positioner for motorized satellite antenna systems

Print Page

Troubleshooting

Symptoms

The Memorized Positions

are not correct.

The LED displays |------ or

------| and can't move any

farther.

The LED lights but the

positioner doesn't work (no

response).

The manual

3 3 3 4 4 4

buttons

drive for only 1 count.

Specification

Input Voltage

Output Voltage

Output Power

Maximum Current

Power Consumption

Position Memories

Protocol

Operating

Temperature

Storage Temperature :

Dimensions (WxHxD) :

Weight

Imported and distributed by satmedia GmbH Germany www.satmedia.com

•

First, try re-sync to correct the position.

•

If the symptom recurs repeatedly, replace

the reed sensor to see whether it is OK.

The symbols mean electrical limits, which have been

set. To cancel this setting, use the "Limit Off" function

on the receiver or press the limit key for more than 10

seconds. The LED will show "|- - - - - -|" when it is

clear.

•

Unplug the AC power. Wait for more than 10

seconds then reconnect it.

•

Unstable AC power can cause this problem. To

protect the stored data, the positioner will lock

itself in this situation. A voltage regulator or UPS

might be needed.

These buttons are for fine- tuning only, and the receiver

doesn't support this function.

220-240VAC 60Hz

13 / 18 VDC (F Type via Coaxial Cable)

13 / 18 VDC (F Type / According to the Input)

36VDC (via Motor Cable)

60 W (Rated / Motor Cable)

5W (Standby) 90W (Maximum)

DiSEqC 1.2

5°C to 40°C (41°F to 104°F)

-20°C to 60°C (-4°F to 140°F)

230x65x165

(Gross)

1.6 Kg (Net) / 1.8 Kg (Gross)

Check points

(Net)/260x70x210