Clarke-tech VBOX V4000 User Manual - Page 11

Browse online or download pdf User Manual for Antenna Clarke-tech VBOX V4000. Clarke-tech VBOX V4000 12 pages. 2-in-1, full-function antenna positioner for motorized satellite antenna systems

Print Page

To store the satellite positions:

1. After the DiSEqC1.2 receiver moves the actuator and stores the satellite

position, the display will automatically show the stored position number.

To recall a satellite position:

1. When you change the program from the receiver, the positioner

automatically moves the actuator to the stored position. But if the

position has not been stored, the positioner will not respond. Refer to

your receiver manual.

2. If the channels and satellites are properly set up in the receiver, it will

move the actuator to the proper position when you change the channel.

When the proper position is reached, the display will show the satellite

number as "01" ~ "99".

3. You can still operate the VBOX positioner from its I R remote if

necessary.

To re-synchronize satellite positions (re-calculate):

1. Not every DiSEqC1.2 receiver supports this re-sync function. If the

receiver has this function, the VBOX will carry out this command, but the

display won't show any message.

2. If necessary, you may still use the VBOX IR remote to re-synchronize.

To operate from the front panel push buttons

1. Move the actuator East/West with the 3 3 3 3 and 4 4 4 4

buttons to the desired position. Press and hold the

power button for 5 seconds, and the display will

show "C--_ _".

2. Press the 3 3 3 3 MANUAL4 4 4 4 buttons to scroll through

the position numbers on the display (1-99) and to

choose the satellite positions you want to store.

3. Within 2 seconds, press the "POWER" button for confirmation. The LED

will show the number you choose. (for example, "P03")

Imported and distributed by satmedia GmbH Germany www.satmedia.com