CTP Systems dBbox2 Manual - Page 6

Browse online or download pdf Manual for Test Equipment CTP Systems dBbox2. CTP Systems dBbox2 17 pages. Version 3 firmware

Print Page

Audio Outputs

All available output signals are the same for analogue, AES and SPDIF signals so will

be described together. Analogue signals go up to 12dBu and digital signals up to

0dBFS.

Output> Analogue

Output> AES BNC

Output> AES XLR

Output> SPDIF BNC

Audio Output Menu

Tone

Int.Mic

Noise Gen.

Frame Rate>

These examples will use AES BNC.

Output> AES BNC

Steady

GLITS

EBU

Sweep

Left

Right

Access the tone menus

Output the built in mic.

Output pink or white noise

This item will only show if digital output is

selected. Set to 48kHz or 96kHz as required.

Tone Type>

Continuous tone both channels.

Graham's Line Ident Tone System. Used extensively for

Stereo line identification by the BBC amongst others.

Cyclic break on the left channel, steady on the right.

Tone rising in frequency from 20Hz to 20kHz. Press Vol- or

Vol+ to start the sweep.

Left channel only

Right channel only

Various types of tone output are

available: