Lenovo ThinkSystem SM27A17643 User Manual - Page 13

Browse online or download pdf User Manual for Switch Lenovo ThinkSystem SM27A17643. Lenovo ThinkSystem SM27A17643 45 pages. Analog 1x8 kvm switch

Print Page

Chapter 3

Quick Start

This section provides instructions on setting up a basic SM27A17643 KVM

system and accessing connected servers.

For instructions on rack-mounting each product, see

Procedure

(on page 5).

Major steps for setting up a basic system include:

1. Connect servers to the SM27A17643 switch. See

(on page 8).

2. Log in to the SM27A17643 switch to access servers, and then log out.

Initial OSD Operation

See

In This Chapter

Before Installation .......................................................................................8

Basic Installation .........................................................................................8

Initial OSD Operation .................................................................................10



It is very important to locate this product in a suitable environment.



The surface for placing and fixing this product should be stable and

level or mounted into a suitable cabinet.



Make sure the place has good ventilation, is out of direct sunlight,

away from sources of excessive dust, dirt, heat, water, moisture, and

vibration.



Convenience for connecting this product to related facilities should

be well considered too.

After rack-mounting the SM27A17643 switch, you can connect servers

and peripheral devices to the switch.

To connect servers to SM27A17643, perform these steps:





Step B: Connect Servers

Step A: Connect the Keyboard/Mouse/Monitor

1. Turn OFF all devices, including the SM27A17643 switch and servers.

(on page 10).

(on page 9)

Rackmount

Basic Installation

(on page 8)