Dirotec Nivcomp RX1 Attachment To The Manual - Page 5

Browse online or download pdf Attachment To The Manual for Measuring Instruments Dirotec Nivcomp RX1. Dirotec Nivcomp RX1 8 pages. Version with test series memory and apu-control

Print Page

attachMEnt to thE niVcoMP Manual

VeRSion with teSt SeRieS MeMoRy

And Apu-contRoL

tEchnical Data

Storage capacity: 1.800 measurements, dispersed on 1... 8 measurement series

Measurement resolution: 1 mm

interface: wireless (IEEE 802.15.4 / FSK, MSK, range ~25 m)

accEssoriEs

USB-Transceiver-Stick with software FLOOREC

Automatic positioning unit APU-Axx for nivcomp levelling instruments

rEcorD MoDE (suPPlEMEnt to thE niVcoMP instructions)

The version nivcomp RX1 can be used like the standard version of the nivcomp.

In addition the setup of the appliance contains the selection data record.

Data record ON

Data record OFF

rEcorD of lEVElling Data / MoDus Data rEcorD

Start in the recording mode

After [on] the appliance is ready for transmitting and shows the number of the new

record series

storage of the reference level

Displays [ni], then displaying the series number

storage of a measuring point

With keystroke the measuring point (P) of the series is shown

mark a measuring point

During P is displayed, press the button again, the display changes to: +P ...

stoP thE Data rEcorD (lEVElling MoDus)

Press the button about 4 seconds until the display [P #] flashes no longer. This displayed

measuring point will not be stored. The appliance turns itself off automatically.

usa