Clas Ohlson 18-2001 Instruction Manual

Browse online or download pdf Instruction Manual for Battery Charger Clas Ohlson 18-2001. Clas Ohlson 18-2001 4 pages.
Also for Clas Ohlson 18-2001: Quick Start Manual (4 pages)

Print Page

Battery Charger

Art. no. 18-2001 • Model V-3150-UK, Art. no. 36-1837 • Model V-3150

Please read the entire instruction manual before using and

save it for future use. We apologise for any text or photo

errors and any changes of technical data. If you have any

questions concerning technical problems please contact our

Customer Service Department.

Description

Battery Charger for Ni-MH R6/R03 batteries. The charger is

compatible with all electricity networks rated 100-240 V and

automatically recognises which voltage is being used. It is

therefore ideal for using in different countries.

Safety

The charger is designed exclusively for charging Ni-MH

batteries. Attempts to charge any other type of battery

may result in personal injury and/or damage to the

charger.

For indoor use only.

Remove the plug of the battery charger from the wall

socket when the charger is not in use.

Do not expose the charger to moisture, knocks or high

temperatures.

Do not use the charger if the plug or casing is damaged.

Do not open the casing. Certain parts inside the casing

carry dangerous currents. Touching these can give you

an electrical shock.

The charger should only be repaired by qualified service

personnel.

Always unplug the device from the wall socket before

cleaning. Never immerse the battery charger in water,

wipe it with a damp cloth instead.

GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service.

ENGLISH

Safety features

Negative delta-V cut off function.

Timer to prevent overcharging.

Overheating protection.

Reverse-polarity protection.

Faulty battery detection.

Use

NOTE!

The batteries are not charged when the product is sold,

and need to be charged before use.

The battery charger measures the amount of charge in

the batteries as soon as it starts charging. Should any

of the batteries be unsuitable for charging (e.g. short

circuited or misaligned) the LED on the charger will flash.

1. Insert the batteries (1-4 R6/R03) into the battery charger.

Make sure that the poles are correctly aligned by

following the markings in battery compartment.

2. Plug the plug into the wall socket. The charger will

recognise at once which voltage is being used. If you

are abroad, a special adaptor plug might be needed (not

included). The red LED will light when the batteries are

being charged.

3. When the batteries are fully charged, the green LED will

come on. The battery charger then automatically begins

maintenance charging.

4. Disconnect the charger from the wall socket and remove

the batteries from the charger as soon after charging as

possible. Do not leave the batteries in the charger for

longer than 2 days. Neither should you leave batteries in

the charger when it is not connected to the mains.

Charging Times

Battery type

1-2 batteries

(no. mins)

R6, 1300 mAh

R6, 1600 mAh

R6, 1800 mAh

105

R6, 2100 mAh

130

R6, 2300 mAh

140

R6, 2500 mAh

150

R03, 600 mAh

R03, 700 mAh

R03, 800 mAh

R03, 900 mAh

Disposal

Follow local ordinances when disposing of this product. If

you are unsure about how to dispose of this product contact

your municipality.

Specifications

Power Supply:

100-240 V, 50/60 Hz, internationally

compatible

Charging capacity:

1-2 x R6

1050 mA

3-4 x R6

525 mA

1-2 x R03 640 mA

3-4 x R03 320 mA

Maintenance charging: R6

50 mA

R03

25 mA

Operating temperature: 0°C-35°C

3-4 batteries

(no. mins)

160

190

210

260

280

300

130

150

160

170