Nikon WT-4 User Manual - Page 16
Browse online or download pdf User Manual for Camera Accessories Nikon WT-4. Nikon WT-4 25 pages. Configuring the wt-4 for upload to a computer (ad-hoc mode)
Also for Nikon WT-4: Basic Instructions (14 pages)
Print Page
$00_WT-4_En.book Page 5 Friday, August 10, 2007 2:02 PM
A
FTP Server
Servers
can be configured using standard ftp services
supported operating systems,
Connection to computers on other networks via a router, Internet ftp
connections and ftp servers running third-party software are not
supported.
A
Ethernet Connection
• When the camera is connected using an ethernet cable, it is not
necessary to set wireless LAN settings.
• When an ethernet cable is connected, the wireless LAN cannot be used.
When connecting the camera via wireless LAN, turn off the WT-4 and
detach the ethernet cable.
A
Router Connection
Connection to computers on other networks via a router is not supported.
A
Firewall Settings
The WT-4 uses TCP ports 20 and 21 for ftp and TCP port 15740 and UDP
port 5353 when connecting to a computer. Computer firewalls must be
configured to allow access to these ports, as otherwise the computer may
not be able to access the WT-4.
A
MAC Address Filtering
If the network using MAC address fi ltering, the fi lter must be supplied
with the MAC address of the WT-4. After attaching the WT-4 to the
camera, choose [Device Info] > [MAC address] (pg.172) from the camera
setup menu and note the wireless and Ethernet MAC addresses.
such as IIS (Internet Information Services).
available with
Introduction
5