Nikon WT-4 Manual do utilizador - Página 16

Procurar online ou descarregar pdf Manual do utilizador para Acessórios para câmaras Nikon WT-4. Nikon WT-4 25 páginas. Configuring the wt-4 for upload to a computer (ad-hoc mode)
Também para Nikon WT-4: Instruções básicas (14 páginas)

Imprimir página

$00_WT-4_En.book Page 5 Friday, August 10, 2007 2:02 PM

FTP Server

Servers

can be configured using standard ftp services

supported operating systems,

Connection to computers on other networks via a router, Internet ftp

connections and ftp servers running third-party software are not

supported.

Ethernet Connection

• When the camera is connected using an ethernet cable, it is not

necessary to set wireless LAN settings.

• When an ethernet cable is connected, the wireless LAN cannot be used.

When connecting the camera via wireless LAN, turn off the WT-4 and

detach the ethernet cable.

Router Connection

Connection to computers on other networks via a router is not supported.

Firewall Settings

The WT-4 uses TCP ports 20 and 21 for ftp and TCP port 15740 and UDP

port 5353 when connecting to a computer. Computer firewalls must be

configured to allow access to these ports, as otherwise the computer may

not be able to access the WT-4.

MAC Address Filtering

If the network using MAC address fi ltering, the fi lter must be supplied

with the MAC address of the WT-4. After attaching the WT-4 to the

camera, choose [Device Info] > [MAC address] (pg.172) from the camera

setup menu and note the wireless and Ethernet MAC addresses.

such as IIS (Internet Information Services).

available with

Introduction