Dirtblaster NE445 Assembly Instructions Manual - Page 7

Browse online or download pdf Assembly Instructions Manual for Swimming Pool Vacuum Dirtblaster NE445. Dirtblaster NE445 8 pages.

Print Page

If debris is still lodged inside the cleaner, you must remove the flapper. To do this you

must take out the four red plugs in the foot pad. These are found on the bottom of the

cleaner. They can be removed using a flat head screwdriver. Underneath there will be four

screws. Unscrew them and remove the foot pad from the main body. Once removed

there is a plate. Remove the single screw from this plate and slide it out of the main body.

This will expose the flapper and it can be pulled out.

Remove any debris that may be inhibiting the flapper. Once dislodged insert the flapper

back into the body. Slide the plate back into position and re-screw it into place. Then

re-install the foot pad. Make sure that all are securely in place.