Dirtblaster NE445 Montaj Talimatları Kılavuzu - Sayfa 7

Yüzme Havuzu Vakumu Dirtblaster NE445 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Dirtblaster NE445 8 sayfaları.

If debris is still lodged inside the cleaner, you must remove the flapper. To do this you

must take out the four red plugs in the foot pad. These are found on the bottom of the

cleaner. They can be removed using a flat head screwdriver. Underneath there will be four

screws. Unscrew them and remove the foot pad from the main body. Once removed

there is a plate. Remove the single screw from this plate and slide it out of the main body.

This will expose the flapper and it can be pulled out.

Remove any debris that may be inhibiting the flapper. Once dislodged insert the flapper

back into the body. Slide the plate back into position and re-screw it into place. Then

re-install the foot pad. Make sure that all are securely in place.