Army Aviation TSS Series Manual - Page 13

Browse online or download pdf Manual for Scales Army Aviation TSS Series. Army Aviation TSS Series 19 pages.

Print Page

1. In the condition of power on, hold on 【redisplay/calibration】

key for 3 second and enter in calibration mode to

display"CAL".

2. Confirm no load on the pan and press【M+/SMPL】key to

perform zero point calibration ,display "zero" on screen,

then display "value of weight to load".

3. If" value of weight to load" need be changed, respectively

press 【TARE】 key to move and press 【ZERO】 key to change

the value of weight to load.

4. Put required weight on the pan for 3-5 seconds and press

【M+/SMPL】key to display "SPAN", and display "PASS"

to return by it self in weighing mode.

5.7 UNIT SETTING (UNAPPROVED)

In general, the units need not reset because they were

already set before delivery. If setting need, the steps are

shown as the followings, units :kg， lb， oz， PCS， %， GSM，

Notice: The units kg and g are only allowed by rules to be

legal measure unit.