Discount Car Stereo A2D-CHRY Quick Start Installation Manual - Page 2

Browse online or download pdf Quick Start Installation Manual for Car Stereo System Discount Car Stereo A2D-CHRY. Discount Car Stereo A2D-CHRY 5 pages. Music streamiing, changer retention for select 1995-02 chrysler

Print Page

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY



This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.



We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage



Requirement

Working CD changer

Introduction

Portable audio products are everywhere, reflecting demand from active people

all over the world to take their music on the road. The A2D-CHRY module

provides Bluetooth music streaming solution for any A2DP enabled

Smartphone or Tablet for select 1995-02 Chrysler with optional CD changer. This

Bluetooth receiver allows Chrysler owners to stream audio books, apple music,

turn by turn directions and more directly into audio system and retains use of

the optional CD changer in lower dash, trunk or hatch. If vehicles does not have

a CD changer, purchase our

BLU-CHR

See Frequently Asked question at the end of this guide for more details.

Installation

Alert! Module connects directly to radio.

connected and functional.

Radio removal from dashboard required to gain access to connector. Vehicle

specific radio removal is not part of this guide; however, some may be available

upon request.

instead.

CD Changer (required) remains

Disconnect factory CD changer plug (See Fig.2) from radio 8-pin "CD"

changer connector (See Fig. 1).

Fig. 1

Connect factory CD changer plug (See Fig. 2), to 8-pin connector on

adapter (See Fig. 3)

Fig. 2

Connect 8—pin plug from adapter (See Fig. 2) to 8-pin "CD" changer

connector on radio (See Fig. 1)

Connect/splice/Tap red wire (See Fig. 4) to a 12V accessory (switched)

supply in vehicle. 12V accessory or switched supply is available on

radio harness.

Warning: Avoid connecting 12V accessory wire to battery (always on)

supply.

Fig. 3