3D Hobby Shop 57" Extra 330 SC Assembly Manual - Page 5
Browse online or download pdf Assembly Manual for Toy 3D Hobby Shop 57" Extra 330 SC. 3D Hobby Shop 57" Extra 330 SC 16 pages.
Print Page5
Remove covering over horizontal stabilizer slot on both sides of fuselage as shown. Remove covering
over elevator servo opening on LEFT side of the fuselage as shown.
Remove covering over wing spar tube hole and wing pin holes in fuselage as shown.
Install rudder onto fuselage and apply 2 large drops of thin CA to each hinge.
Remove covering over control horn slot in rudder. Install double-sided rudder control horn as shown with
plenty of medium or thick CA, or epoxy glue. Install tail wheel as shown with two small wood screws.
Remove the set screws in the tailwheel assembly and re-install with blue loctite.