3D Hobby Shop 57" Extra 330 SC Посібник з монтажу - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник з монтажу для Іграшка 3D Hobby Shop 57" Extra 330 SC. 3D Hobby Shop 57" Extra 330 SC 16 сторінок.

Remove covering over horizontal stabilizer slot on both sides of fuselage as shown. Remove covering

over elevator servo opening on LEFT side of the fuselage as shown.

Remove covering over wing spar tube hole and wing pin holes in fuselage as shown.

Install rudder onto fuselage and apply 2 large drops of thin CA to each hinge.

Remove covering over control horn slot in rudder. Install double-sided rudder control horn as shown with

plenty of medium or thick CA, or epoxy glue. Install tail wheel as shown with two small wood screws.

Remove the set screws in the tailwheel assembly and re-install with blue loctite.