3D Hobby Shop Edge 540 Assembly Manual - Page 3

Browse online or download pdf Assembly Manual for Toy 3D Hobby Shop Edge 540. 3D Hobby Shop Edge 540 17 pages.

Print Page

Covering Material –

Your airplane is covered in genuine Oracover covering material. If you ever need to purchase additional

covering, Ultracote brand covering is an exact match.

Removing covering –

Use a new sharp blade in your hobby knife when removing covering over the access holes in the

airplane. You can also use a hot soldering iron, or a "hot knife" to remove covering if desired. Note that

covering material cuts easily, but rapidly dulls knife blades. To achieve clean cuts, change the blade

often. Remove the covering over the access holes in the fuselage as shown:

emove covering for the horizontal stabilizer, and for the elevator servo – NOTE only remove covering

for the elevator servo on ONE side of the fuselage.