3D Hobby Shop EPP EXTRA 330SC Assembly Manual - Page 6

Browse online or download pdf Assembly Manual for Toy 3D Hobby Shop EPP EXTRA 330SC. 3D Hobby Shop EPP EXTRA 330SC 15 pages. Arf rc

Print Page

Apply thin CA glue to the joint of the horizontal stabilizer and fuselage. Allow the thin CA to wick into the

joint.

Install the elevator control horn the same as the aileron control horns.

Insert elevator back into the horizontal stabilizer and glue the hinges using the same technique as the aileron hinges. Tape

the elevator as show to keep the the elevator from moving will the CA dries. You will find the CA takes longer to setup in

the EPP then when used on balsa.