3D Hobby Shop EPP EXTRA 330SC Montaj Kılavuzu - Sayfa 6

Oyuncak 3D Hobby Shop EPP EXTRA 330SC için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. 3D Hobby Shop EPP EXTRA 330SC 15 sayfaları. Arf rc

Sayfayı Yazdır
Apply thin CA glue to the joint of the horizontal stabilizer and fuselage. Allow the thin CA to wick into the
joint.
Install the elevator control horn the same as the aileron control horns.
Insert elevator back into the horizontal stabilizer and glue the hinges using the same technique as the aileron hinges. Tape
the elevator as show to keep the the elevator from moving will the CA dries. You will find the CA takes longer to setup in
the EPP then when used on balsa.