3D Hobby Shop Velox VR-1 Assembly Manual - Page 9

Browse online or download pdf Assembly Manual for Toy 3D Hobby Shop Velox VR-1. 3D Hobby Shop Velox VR-1 17 pages.

Print Page

Install the tailwheel support bracket onto the fuselage with 2 small wood screws and install the tail wheel

and collar as shown. Be careful to make sure that the bracket does not cause drag on the rudder and

rudder servo. If necessary, you can open the hole in the bracket larger.

Locate the carbon wing spar tube and the horizontal stabilizer. Insert both into the fuselage. To help

align the horizontal stabilizer to the wing spar tube, it can be helpful to support the fuselage on equal-

height supports. In this case, we have used steel paint cans as shown.