CUBE in-a-box V1.series Detailed Assembly Instructions - Page 3

Browse online or download pdf Detailed Assembly Instructions for Indoor Furnishing CUBE in-a-box V1.series. CUBE in-a-box V1.series 6 pages.

Print Page
Unpack carefully all the parts, and double check quantities with the packing list.
If there is a problem with the count, call our Customer Service at 1.855.882.3905
1
2
3
4
- 1 -
Cube in-a-Box – V1.series
or email us at [email protected]
Slide first panel 1T (28"W)
into end-post A (37"H) on
one side, and into a 2-way
post B (57"H) on the other
side.
TIP: letter T is for panels
with a pre-installed alu cap
that goes on top panels.
Slide half-panel 2 (48"W) in
between the two 2-way
posts B (57"H).
Slide second panel 1T in
between 2-way post B and
second end-post A.
Make sure all panels are
pushed all the way down.
Slide raceway-frame 3 on
top of half-panel 2.
Slide rail-panel 4 (hooks
facing up) on top
of raceway-frame 3.
Slide panel 5T on panel 4.
TIP: the rail-panel must be
installed hooks facing up so
paper/pencil trays can hold.