CUBE in-a-box V1.series Gedetailleerde montage-instructies - Pagina 3

Blader online of download pdf Gedetailleerde montage-instructies voor {categorie_naam} CUBE in-a-box V1.series. CUBE in-a-box V1.series 6 pagina's.

Unpack carefully all the parts, and double check quantities with the packing list.

If there is a problem with the count, call our Customer Service at 1.855.882.3905

- 1 -

Cube in-a-Box – V1.series

Slide first panel 1T (28"W)

into end-post A (37"H) on

one side, and into a 2-way

post B (57"H) on the other

side.

TIP: letter T is for panels

with a pre-installed alu cap

that goes on top panels.

Slide half-panel 2 (48"W) in

between the two 2-way

posts B (57"H).

Slide second panel 1T in

between 2-way post B and

second end-post A.

Make sure all panels are

pushed all the way down.

Slide raceway-frame 3 on

top of half-panel 2.

Slide rail-panel 4 (hooks

facing up) on top

of raceway-frame 3.

Slide panel 5T on panel 4.

TIP: the rail-panel must be

installed hooks facing up so

paper/pencil trays can hold.