Dish Network Home Network Installation Instructions Manual - Page 11
Browse online or download pdf Installation Instructions Manual for Receiver Dish Network Home Network. Dish Network Home Network 18 pages.
Print Page
Setting up the Receiver
Once the receiver has been connected to the home network, use these steps to set up and verify the
receiver's Internet connection.
Using the DISH Network remote control for the receiver that is connected to the home network,
access the Network Setup screen by pressing MENU, selecting
Broadband Setup
address is all 0s, select
you will return to the Network Setup screen.
Verify the Connection Status on the Network Setup screen shows
the IP address does not show all 0s. If the IP address shows all 0s or the Connection Status shows
Not Connected, refer to Troubleshooting on page 12.
Select
to exit the Network Setup screen.
Done
Page 10
, then
Network Setup
Reset Connection
Network Setup Screen
Network Setup Screen with IP Address
. Verify the IP address is populated (not all 0s). If the IP
. An Attention 875 message will display briefly, then
Attention 875 Message
System Setup
,
Installation
, and that
Connected Online
,