3D Nord magicolor 2300W Installation Manual - Page 16

Browse online or download pdf Installation Manual for Printer 3D Nord magicolor 2300W. 3D Nord magicolor 2300W 19 pages.

Print Page

The internal components of the print head unit are NOT A FIELD SERVICEABLE ITEM. Therefore, the

print head unit should not be opened under any circumstances.

Laser Caution For United States Users—CDRH Regulations

This printer is certified as a Class I laser product under the Regulation Performance Standard according to

the Food, Drug, and Cosmetic Act of 1990. Compliance is mandatory for laser products marketed in the

United States, and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food

and Drug Administration (FDA) of the Department of Health and Human Services (DHHS). This means

that the product does not produce hazardous laser radiation. The label shown below indicates compliance

with the CDRH regulations and must be attached to laser products marketed in the United States.

Laser Safety Label—CDRH Requirement

CAUTION:

Use of controls, adjustments, or performance other than those specified

in this manual may result in hazardous radiation exposure

This is a semiconductor laser. The maximum power of the laser diode is 5 mW, and the wavelength is

770–795 nm.

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

1 - Print head unit

2 - Laser aperture

1 - Laser safety label

Safety Information