3D Nord magicolor 2300W Installation Manual - Page 17

Browse online or download pdf Installation Manual for Printer 3D Nord magicolor 2300W. 3D Nord magicolor 2300W 19 pages.

Print Page

Warranty Considerations

Various factors can affect a printer's warranty, such as electrostatic dam-

age, unsupported consumables, and other actions listed on this page. Read

your printer warranty carefully. For information about your warranty, go to

http://printer.konicaminolta.net/support, then click on "Answer Base".

If KONICA MINOLTA printer failure or damage is found to be directly attrib-

utable to the use of non-KONICA MINOLTA approved consumables, print

media, and/or accessories, KONICA MINOLTA will not repair the printer free

of charge. In this case, standard time and material charges will be applied to

service your printer for that particular failure or damage.

These Actions Will Result in Voiding Your Warranty

Print Media

Electrostatic

Discharge

Instructions

Modifications

Consumables

OPC Drum

Cartridge and

Toner Cartridge

Accessories

Attention

Don't return any merchandise to KONICA MINOLTA without calling for

a Return Merchandise Authorization (RMA) number (Americas only).

Refer to the Service & Support Guide or www.konicaminolta.net/

printer/ for the Technical Support telephone number where you can

obtain an RMA number. If the RMA number is not prominently visible

on the outside carton of the items returned, KONICA MINOLTA will not

accept receipt.

Warranty Considerations

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Use of nonsupported media, such as inkjet paper.

See "Using Media" in the User's Guide for approved media.

Contact your local vendor or konicaminolta.net/printer/ for

purchase information.

Failure to protect the printer controller board and any associated

daughterboard or module from electrostatic discharge or damage

while performing any task involving the controller board.

Failure to follow instructions in the printer documentation.

Any modifications or changes to this product not expressly

approved in writing by the manufacturer responsible for

compliance to Federal Regulations could void your authority to

operate this product within the Laws and Regulations of the

Federal Communications Commission.

Use of consumables not manufactured or supported by KONICA

MINOLTA. Any damage to the printer or quality problems caused

by a refilled toner cartridge use.

Any damage resulting from mishandling the OPC drum cartridge

or toner cartridge.

Use of accessories not manufactured/supported by

KONICA MINOLTA.