3D Systems LC-3D Print Box Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Printer 3D Systems LC-3D Print Box. 3D Systems LC-3D Print Box 2 pages.

Print Page

If the voltage needs to be changed, Please follow these steps to

adjust the voltage setting.

1. Access the engineering mode display screen by pressing

the Arrow "Up" and "Down" button together and hold for

3~4 seconds.

2. In engineering mode, change voltage by pressing the

'P' button. Please wait until you see that the voltage has

changed. Continue to press the "P" button until your coun-

try specific voltage rating appears.

3. To save the voltage, turn off the LC-3D Print box using the

power switch on right side of the print box.

4. Once saved, the newly set voltage should appear on the

Welcome screen when the unit is turned back on. This par-

ticular unit has been changed to 220V.

P/N 45-D20 Rev.A