3D Systems LC-3D Print Box 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} 3D Systems LC-3D Print Box에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3D Systems LC-3D Print Box 2 페이지.

If the voltage needs to be changed, Please follow these steps to

adjust the voltage setting.

1. Access the engineering mode display screen by pressing

the Arrow "Up" and "Down" button together and hold for

3~4 seconds.

2. In engineering mode, change voltage by pressing the

'P' button. Please wait until you see that the voltage has

changed. Continue to press the "P" button until your coun-

try specific voltage rating appears.

3. To save the voltage, turn off the LC-3D Print box using the

power switch on right side of the print box.

4. Once saved, the newly set voltage should appear on the

Welcome screen when the unit is turned back on. This par-

ticular unit has been changed to 220V.

P/N 45-D20 Rev.A