3D Systems NextDent Wash Instructions For Use - Page 4

Browse online or download pdf Instructions For Use for Dental equipment 3D Systems NextDent Wash. 3D Systems NextDent Wash 5 pages.

Print Page

Precautions

•

Make sure that the NextDent Wash unit is placed on a flat, clean surface capable of

safely carrying the device.

•

Do not change the position of the wash container during operation.

•

Avoid spilling washing liquid into the main body of the NextDent Wash.

•

Use only authorized accessories (f.e. power cord).

•

Alcohol is: Use up to 99% isopropyl alcohol (IPA) or ethanol according the IFU of the

used resin.

•

Always refer to alcohol supplier safety data sheet (SDS) as the primary source of

information on storage and handling.

•

Alcohol is flammable and should be stored away from sources of ignition.

•

Wear gloves and handle alcohol in well ventilated areas.

•

Alcohol evaporates quickly, so keep the lid(s) closed whenever possible.

•

Do not modify: NextDent Wash is intended to be used as directed only.

•

Professional use only.

Maintenance

Cleaning

1. Remove the universal jig, mesh basket and stirrer partition from the wash container.

2. Clean the inside of the wash container using IPA or ethanol.

3. Wipe with a smooth and clean cloth after washing.

4. Assemble the separated accessories.

Safety Symbol

The following symbols are found on the device and this document.

Always use the equipment in the safest possible manner.

CAUTION: When moving the unit, be sure to turn off the power.

Environmental conditions

Installation: indoor

altitude: up to 2000 m

Operating Temperature / humidity: 5 - 40 ℃ / 20 – 80 %

Packaging

Be careful when opening the box.

Please keep your packaging and box.

Keep the original box for future shipments.