CAME v6000 Installation Manual - Page 11
Browse online or download pdf Installation Manual for Garage Door Opener CAME v6000. CAME v6000 17 pages. For garage doors
Print Page
Some functions must be set so that the operator is able to work properly while others are optional
Mandatory functions
Determining the end-run points when opening
Follow the end-run point setting order indicated in this manual.
While operator is not moving
Press P for about 5
seconds.
The operator emits a single
sound and 1 appears.
Press P again,
1 fl ash.
Press +
Allow the door to reach the
desired opening position.
Press P to save the
operation.
Memorising the programming
IT IS MANDATORY to complete programming with this function to prevent loss of settings saved!
Press + to select 5.
Adjusting sensitivity.
The door must be balanced correctly. If the sensitivity is too low, it
may cause door malfunctioning.
By default, sensitivity is set to medium level. To increase or decrease
the sensitivity:
Press P for about 5 seconds, 1 appears.
Press + and select 4.
Press P,
appears.
Press + or - to select an appropriate level
of sensitivity.
Minimum
Maximum
Press P to save the operation.
Determining the end run points while closing
Sensitivity Level
The last phase of programming is always storage (function 5), otherwise the set-
tings are not saved.
Press +, 2 appears.
Press P, 2 fl ashes.
Press -.
Allow the door to reach the
desired closing position.
Press P to save the operation.
Press P. The display segments turn in clockwise.
Programming is successfully stored.
Checking run self-learning
Press +, 3 appears.
Press P, 3 fl ashes.
The door reaches the closing
end-run.
Press P.
The door reaches the closing
limit switch.