CAME BPT AGATA VC-V Installation Instructions Manual - Page 10

Browse online or download pdf Installation Instructions Manual for Intercom System CAME BPT AGATA VC-V. CAME BPT AGATA VC-V 13 pages.

Print Page
CAME BPT AGATA VC-V Installation Instructions Manual
M2
M1
M1
BOUT
beep
beep
>3''
>3''
PROG
<6''
<6''
PROG
M2
SW3
SW3
PROG
PROG
M2
SW3
Reprogramming procedure
Entering Programming Mode. Press the PROG a key for at
least 3 seconds and then release it (within 6 seconds) as soon
as the LED PROG light fl ashes and the key back lighting lights up
as illustrated in fi gure
. Failure of the PROG LED to light up,
indicates a malfunction. Check the connections and re-access
the programming mode.
Programming the call keys. Lift the receiver (if present) of the
extension that you want to programme
lock
release and AUX2
On the entry panel, press the call key to be associated with the
internal extension
: an acoustic signal will confi rm that the set-
ting was stored. Hang up the receiver again, if necessary
continue, repeating the same operations for the other extensions.
then press the door
 buttons.
and