CAME BPT AGATA VC-V Installation Instructions Manual - Page 9
Browse online or download pdf Installation Instructions Manual for Intercom System CAME BPT AGATA VC-V. CAME BPT AGATA VC-V 13 pages.
Print Page
M1
A
M1
Programming of the Key Type. Press the fi rst key of the entry
panel in the position indicated
stops fl ashing
and remains lit.
M1
BOUT
Programming the call keys. Lift the receiver (if present) of the
extension that you want to programme e then press the door lock
release
and AUX2
On the entry panel, press the call key to associate with the inter-
nal extension
: an acoustic signal will confi rm that the setting
was stored.
Hang up the receiver again, if necessary
peating the same operations for the other extensions.
Exiting programming.
Briefl y press the PROG key
NOTE. If no action is performed, the procedure will automatically
end after 30 minutes.
M1
BOUT
/ A until the backlighting LED
PROG
PROG
M2
SW3
buttons.
and continue, re-
beep
beep
: the PROG LED off .
PROG
M2
M2
SW3
PROG
<1''
<1''
SW3