3Doodler Create+ User Manual - Page 2

Browse online or download pdf User Manual for Accessories 3Doodler Create+. 3Doodler Create+ 11 pages.
Also for 3Doodler Create+: User Manual (16 pages)

Print Page

SECTION 2: GETTING STARTED

We created this User Manual

as a step-by-step guide to

get you comfortable with

your 3Doodler Create+ and

its features. Once you are

familiar with these steps, you

will be able to Doodle with

confidence.

STEP 1:

Turn on your

3Doodler Create+

and wait for it to

heat up

02/2022

Speed/ Drive

Controls

SPEED/ DRIVE BUTTON

LEGEND:

• Click once to start

• Click once to stop

• Double click to reverse

LED Light

Tells you when your

3Doodler Create+ is

ready to use

LIGHT LEGEND:

SOLID RED:

Pen is heating up

GREEN: Ready to Doodle with

PLA/ WOOD

BLUE: Ready to Doodle

with ABS/FLEXY

FLASHING GREEN/BLUE:

Reversing plastic

How it Works:

The 3Doodler Create+ melts plastic filament and uses a motor and gears

to push it through the pen's nozzle in a thin line. This process is called

extruding or extrusion, and we will refer to it throughout this user

manual. Once extruded, the filament cools and hardens quickly, allowing

you to draw on surfaces and in the air. This user manual will show you how!

Power Adapter

Plug the power adapter into

the yellow hole at the back of

the pen.

Nozzle

Hot tip where filament is

extruded

Power Adapter

Slide the control switch to

PLA

(or your desired filament

setting).

SECTION 2: GETTING STARTED

Maintenance Cover

Allows you to look inside

your pen to see filament

Control Switch

For turning the 3Doodler

Create+ ON/OFF, and

selecting

PLA

ABS/FLX

extrusion temperatures

Plastic Loading Port

Insert your filament

strand here

60-90

secs

Light to

GREEN

The LED light will glow

RED

while the pen is reaching the

required temperature. Once the

light has turned GREEN, your

pen is ready to extrude.