3DP Workbench Manual - Page 7

Browse online or download pdf Manual for 3D Printers 3DP Workbench. 3DP Workbench 12 pages. Moving and folding the gantry

3DP Workbench Manual
3DP Moving and Folding the Gantry
Approved By:
Date: <6/14/2016>
Page 6 of 11
Step 5: Folding the Z axis.
With the 4mm hex wrench remove the 8 bolts securing the Z axis to the bed rails. Always
have an assistant hold the gantry upright while removing the bolts.
Carefully lay the X axis down on to the built in support arm and re-insert bolts to secure
the axis in place before moving.
Note: The extruder head position may need to be slightly adjusted to clear the
E-stop button.
WI XXXX-xxxxxx– 3DP Moving the Printer